board_zgbl.h File Reference

ATZGB ZGB-LINK-{230,231,212} modules. More...

Go to the source code of this file.

Defines
#define	HIF_TYPE   (HIF_UART_1)
#define	HWTIMER_REG   (TCNT1)
#define	HWTIMER_TICK   ((1.0*HWTMR_PRESCALE)/F_CPU)
#define	HWTIMER_TICK_NB   (0xFFFFUL)
#define	HWTMR_PRESCALE   (1)
#define	NO_KEYS   (1)
#define	NO_LEDS   (1)
#define	SLEEP_ON_KEY()   do{}while(0)
#define	SLEEP_ON_KEY_INIT()   do{}while(0)
#define	TIMER_INIT()
#define	TIMER_IRQ_vect   TIMER1_OVF_vect
#define	TIMER_POOL_SIZE   (4)
#define	TIMER_TICK   (HWTIMER_TICK_NB * HWTIMER_TICK)

---

Detailed Description

ATZGB ZGB-LINK-{230,231,212} modules.

The wiring between radio transceiver and ATmega is shown below:

          AVR       AT86RF2xx
          ---       ---------
          PB4  -->  SLPTR
    XTAL1/PD6  <--  CLKM
          PD4  <--  IRQ (ICP1)
          PB5  -->  RSTN
          PB0  -->  /SEL
          PB1  -->  SCK
          PB2  -->  MOSI
          PB3  <--  MISO
          PE7  <--  DIG2 (INT7)

    For the zgb-link modules
    KEY: None
    LEDS: None

    The EVM-HOST has memory mapped Keys.

Fuses/Locks:
     LF: 0xe2 - 8MHz internal RC Osc.
     HF: 0x11 - without boot loader
     HF: 0x10 - with boot loader
     EF: 0xff
     LOCK: 0xef - protection of boot section

Bootloader:
    Start at byte=0x1e000, address=0xf000, size = 4096 instructions/ 8192 bytes

Build Options

• zgbl230 : ZGB-LINK-Modul with AT86RF230
• zgbl231 : ZGB-LINK-Modul with AT86RF231
• zgbl212 : ZGB-LINK-Modul with AT86RF212

• zgbh230 : EVM-HOST Plattform with AT86RF230
• zgbh231 : EVM-HOST Plattform with AT86RF231
• zgbh212 : EVM-HOST Plattform with AT86RF212

---

Define Documentation

#define NO_LEDS   (1)

if defined, no LEDs are connected

#define TIMER_INIT

(

)

Value:

do{ \
        TCCR1B |= (_BV(CS10)); \
        TIMSK1 |= _BV(TOIE1); \
    }while(0)