8.3 OSPF6 interface

Interface Command: ipv6 ospf6 cost COST

Sets interface’s output cost. Default value depends on the interface bandwidth and on the auto-cost reference bandwidth.

Interface Command: ipv6 ospf6 hello-interval HELLOINTERVAL

Sets interface’s Hello Interval. Default 40

Interface Command: ipv6 ospf6 dead-interval DEADINTERVAL

Sets interface’s Router Dead Interval. Default value is 40.

Interface Command: ipv6 ospf6 retransmit-interval RETRANSMITINTERVAL

Sets interface’s Rxmt Interval. Default value is 5.

Interface Command: ipv6 ospf6 priority PRIORITY

Sets interface’s Router Priority. Default value is 1.

Interface Command: ipv6 ospf6 transmit-delay TRANSMITDELAY

Sets interface’s Inf-Trans-Delay. Default value is 1.

Interface Command: ipv6 ospf6 network (broadcast|point-to-point)

Set explicitly network type for specifed interface.